产品简介
Product Introduction
BOH 6936是高效无卤型阻燃剂，可以应用于聚醚型聚酯型海绵的生产中，少量添加即可通过GB8410、FMVSS302标准和Cal117标准。此阻燃剂在泡绵老化过程中不迁移，从而拥有阻燃的持久性，能更好的适用于各类阻燃产品的生产。
BOH 6936 is a highly efficient halogen-free flame retardant applicable to the production of both polyether-type and polyester-type sponges. A small addition enables the foam to pass the GB8410, FMVSS302 and Cal117 standards. This flame retardant does not migrate during foam aging, thus providing durable flame retardancy, and is well suited for the production of various flame-retardant products.
BOH 6936 有接近于零或者等于零的VOC。
BOH 6936 has near-zero or zero VOC.
BOH 6936耐水解，耐醇解，适合使用于预混组合料中
BOH 6936 is resistant to hydrolysis and alcoholysis, and is suitable for use in premixed blended polyols.
理化性能
Physical and Chemical Properties
BOH 6936理化性能参数
BOH 6936 Physical and Chemical Parameters
| 外观Appearance | 淡黄色液体Light yellow liquid |
| 密度 (25℃，kg/m³)Density (25℃, kg/m³) | 1.05±0.05 |
| 黏度（25℃, mpa·s）Viscosity (25℃, mpa·s) | 500±25 |
| 水份（%）Moisture content (%) | <0.5 |
| 酸值（mgKOH/g）Acid value (mgKOH/g) | <2 |
推荐配方
Recommended Formula
| 聚醚Polyether | 100 |
| BOH 6936 | 12 |
| 水Water | 4.0 |
| 二氯甲烷Methylene chloride | 3 |
| 硅油Silicone oil | 1.3 |
| 辛酸亚锡Stannous octoate | 0.35 |
| BOH 5518 | 0.26 |
| TDI80/20（指数）TDI 80/20 (index) | 115 |
| 密度 (kg/m³)Density (kg/m³) | 24 |
注：该配方可通过FMVSS302标准和Cal117标准。以上是实验室参数，以供参考，实际数值视发泡工艺条件不同而变化
Note: This formula can pass the FMVSS302 and Cal117 standards. The above are laboratory parameters for reference only; actual values vary depending on foaming process conditions.
包装及贮存
Packaging and Storage
50公斤，200公斤铁桶包装，贮存于阴凉、干燥、通风处。
Packed in 50kg and 200kg steel drums, stored in a cool, dry and ventilated place.